TV Mounting in Winston-Salem, NC
Mounting a TV in a Winston-Salem house is rarely as simple as finding a stud. In Ardmore and the West End, walls are plaster over wood lath, which cracks if you drill carelessly and hides studs from most finders. The brick ranches that fill so much of the city often have a painted brick or block fireplace wall that is the obvious place for a screen, and that means masonry anchors and a plan for the cables. Newer homes in Clemmons, Lewisville and Kernersville tend to have tall great rooms with a gas fireplace and a stone or tile surround, where the TV ends up high and the wiring path runs through a firebox chase. And downtown lofts in converted tobacco warehouses can have exposed brick, steel or concrete that call for different hardware altogether.
We start by finding exactly what's behind the wall where you want the screen and choosing a mount rated well past your TV's weight. On plaster, we drill slowly with the right bits to keep the surface intact and anchor into framing, not just the plaster. On brick and stone, we drill into solid masonry rather than mortar joints whenever possible and use sleeve or wedge anchors sized for the load. We set the height for comfortable viewing from your seat, level the mount precisely, and hide the cables in the wall with a code-compliant kit where the framing allows, or in a neat paintable raceway where it doesn't. Our licensed electricians can add a recessed outlet behind the screen. When we leave, the TV is solid, the picture is straight and the dust is gone.
What this covers
- Wall mounting on drywall, plaster, brick and stone
- Over-fireplace mounting with heat clearance checked
- Tilting, fixed and full-motion articulating mounts
- In-wall cable concealment where framing allows
- Surface raceways painted to match the wall
- Recessed outlet behind the TV by our electricians
- Soundbar, streaming box and shelf mounting
- Taking down old mounts and patching the holes
How a TV mounting visit usually goes
Pick the Spot
We look at seating, sight lines, glare from windows and what's behind the wall, then agree on the screen height and the cable route with you before drilling.
Locate and Prepare
We find studs or solid masonry, mark the layout, check for wiring and pipes, and protect the floor and furniture under the work area.
Mount and Level
The bracket goes into framing or solid masonry with hardware rated well over the TV's weight, then it's leveled precisely and the screen is hung and tested.
Hide Cables and Clean
Cables run in the wall or in a matching raceway, devices get connected, you get a quick walkthrough, and we vacuum up every bit of drill dust.
A lot of Winston-Salem living rooms were never designed around a television. In the bungalows of Ardmore and Washington Park, windows, radiators, built-in bookcases and doors claim most of the wall space, and the only open wall may be the one you see from the front door. In those rooms we sometimes suggest a full-motion arm on a side wall so the screen folds flat when it's off, or a smaller set on a well-anchored bracket over a chest. Downtown lofts and the apartment conversions around the Innovation Quarter bring a different puzzle: exposed brick and timber that you want to show off, not hide behind a channel of cables. There we look at routing through an adjacent framed wall or a neat run along a beam so the room's character stays intact.
What shapes the price in Winston-Salem
TV mounting costs mostly depend on the wall, the mount and the cables. A medium screen on a standard drywall wall with a fixed or tilting bracket is the simplest job. Plaster, brick, stone and tile take more time and specialized anchors. Large or heavy screens and full-motion arms need extra hands and heavier hardware. Running cables inside the wall, adding a recessed outlet, or working above a high fireplace in a two-story family room all add steps. Mounting several TVs or adding soundbars and shelves on the same visit is more economical than spreading them out.
Neighbors often ask
Can you mount a TV on my plaster walls without cracking them?
Yes. Plaster needs more care than drywall but it holds a mount well when the job is done properly. We locate the studs behind the lath, drill with sharp bits at a slow speed so the plaster doesn't spall, and fasten the mount into the framing rather than relying on the plaster itself. If a stud doesn't land where you want the screen, we can use a mount with a wider plate or add a backer board that spans two studs.
Is it a good idea to put the TV over my fireplace?
It can be, as long as heat and viewing angle are considered. We check how warm the wall above the firebox gets, especially with a wood-burning fireplace, and look at the mantel depth and the TV maker's heat guidance. Because a TV over a mantel ends up high, a pull-down or tilting mount helps a lot. If the wall runs too hot, we'll recommend a different spot rather than risk the set.
Can you hide the wires inside the wall?
In most framed walls, yes. We run power and signal cables through the wall cavity with an in-wall power kit, or our licensed electricians install a recessed outlet behind the screen. Exterior walls with insulation, brick fireplace walls and walls with fire blocking take more planning, and in those cases a slim raceway painted to match the wall is often the cleanest answer.
My house has an old brick fireplace wall. Will drilling damage it?
Not when it's done right. We drill into the face of solid brick rather than the mortar joints where possible, because old lime mortar can be soft and crumble under load. We use masonry bits with a hammer drill on a measured setting and sleeve anchors sized for the mount. Holes are placed so they're hidden behind the bracket, and if you take the TV down someday, they can be filled with tinted mortar.
I rent my home. Can you mount a TV in a way that's easy to undo?
Yes, with your landlord's permission. We keep the number of holes to the minimum the mount needs, place them where they patch easily, and can come back when you move out to take the mount down and patch and paint the wall. Plenty of renters near Wake Forest and downtown do it this way.
Folks pair this with
Drywall Repair
Drywall Repair →Furniture Assembly
Furniture Assembly →Door Repair & Adjustment
Door Repair & Adjustment →Ceiling Fan Installation
Ceiling Fan Installation →TV Mounting around Winston-Salem
TV Mounting is one of 14 jobs our Winston-Salem handyman crew handles, in Winston-Salem and in nearby communities:
Ready to get your TV Mounting handled?
Send a photo and a sentence — we'll answer with a real price and a real day on the calendar.